VTL TP6.5 Series II


Pré amplificador de phono TP6.5 Series II

Acabamento preto ou prateado

The TP-6.5 Series II Signature Phono Preamplifier is a major update and improvement to the TP-6.5 Signature Phono stage. Its upgrades include circuit enhancements originally developed for the acclaimed TL-7.5 Series III Reference Preamplifier, as well as newly designed, more robust power storage for the active MC stage.

The original TP-6.5 Phono preamplifier complemented the top of the line VTL TL-6.5 and TL7.5 Linestage Preamplifiers, matching them in sonic performance, user interface and cosmetics. The new TP-6.5II pushes the analog envelope even further, utilizing the latest innovations from VTL. The result is a phono stage that substantially improves upon the performance of its predecessor.

The phono stage employs hybrid JFET/tube circuitry for quiet operation, multiple low-noise cascaded regulators and shielded power supplies for increased dynamics, accurate 4-corner passive RIAA equalization and 68dB of gain from the balanced outputs, all in a single chassis unit. A wide selection of load and gain settings as well as other input functions are easily accessible via both front panel and remote control.

One of the design breakthroughs in the TP-6.5 II is the use of the shunt regulator in the power supply, which offers superior regulation and ripple rejection and minimizes the sonic impact on the audio signal due to lowered amplification in the regulator. The result is a noticeable lowering of background noise contributing to stability and better delineation of midrange and midbass. There is more air around the voices, more finesse, extension, and nuances – giving an overall more lifelike impression. Especially noticeable improvement in the active MC Stage is its speed and dynamics.

Further improvement in the TP-6.5 Series II comes from the implementation of massive low impedance power supply storage in the active MC stage, fed by multiple cascaded regulators and capacitance multiplier circuits. The resulting rigid, low impedance power supplies prevent power supply ripple and other noise from affecting the sensitive MC signal. The new gel capacitor technology, which offers dramatically higher capacitance in much smaller packages, is key to the breakthrough in the TP6.5 II’s active MC stage directly contributing to its remarkable lower noise level and ability to handle very low output cartridges.

The TP-6.5II also offers a high quality transformer Moving Coil step up option, both to offer a low-noise MC step up, and a second MC stage. This second MC input replaces the original MM input that is normally standard in the TP6.5 Phono Stage, and uses the existing MM input to provide access to the transformer MC step up.

The addition of the step up transformer allows both for appropriate loading for very low-output cartridges, and the flexibility of handling different cartridges with different step up methods, as in some cases certain cartridges can sound substantially better with transformers than they do with active gain stages. The transformer also allows the cartridge to be loaded via the transformer, instead of via the loading resistor, retaining as much of the signal available from these cartridges as possible.

Switching between the inputs is done only after the signal has been amplified, avoiding signal losses inherent in switching the fragile MC signal straight from the cartridge.

This option offers the maximum MC cartridge handling flexibility, and also accommodates multiple arms and multiple MC cartridges, as both inputs can be connected simultaneously.


Funcionalidades no painel frontal
Input selection
MC Gain adjust: 5 steps of 6dB: 44dB, 50dB, 56dB, 62dB, 68dB
MC Step Up Option Gain: 65dB balanced output, 59dB single-ended output
Load setting: MC: 100Ω, 250Ω, 470Ω, 1kΩ, 2.5kΩ, 4.7kΩ, 47kΩ and User Defined, and MM – 10kΩ, 22kΩ, 47kΩ and User Defined.
Load setting for MC Step Up: 47Ω, 100Ω, 470Ω, 1.0kΩ
Mono switch
Phase flip, absolute, and channel to channel
RIAA select, for Enhanced RIAA and Rumble cut

Funcionalidades no comando à distância
Input select
Phase reverse
Rumble cut
Cartridge Load

Características do circuito
2 single ended inputs, with discrete load settings for each input
Single-ended and Balanced outputs, with 68dB total gain balanced
Active Hybrid low noise J-FET driving high current 12AU7 MC gain stage for highest resolution of small signal levels
All high fidelity tubes: 12AU7, 12AX7, 12AT7, all operating in linear range
Accurate 4-corner passive RIAA filter, with split pole for greater accuracy
Zero loop feedback
Gain trims for accurate channel to channel balance
Signature and Reference-level coupling capacitors
Shock mounted gain stages for resistance to vibration interference
Extensive RF filtering on AC path
Switchable RF filtering on both inputs
Low radiation UI core power transformers, with dual mono supplies, and separate logic supply
Dual mono multiple cascaded precision-regulated and shielded power supplies for low noise, with film bypass for high frequency performance
High quality transformer MC step up option for low noise and excellent match to low-output MC cartridges
Quiet sleep mode on processor when not in use
Quiet 7-segment LED display on the front panel (for gain and load display)

Características mecânicas
Rigid braced steel and aluminum chassis for EMI, RF, and hum shielding with minimal interference from vibration
All noisy components steel shielded for low RF and hum radiation
Additional steel shielding on amplifier section for lowest noise


Vacuum Tube Complement 2 x 12AU7 MC (MC Stage), 2 x 12AX7, 2 x 12AT7MM, 2 x 12AT7
Inputs 2 pairs single-ended/RCA
Outputs 1 pair balanced out XLR out, 1 pair single-ended RCA out
Remote control functions Power, MC/MM Source Select, Gain up/down, Mute, Rumble, Load, Mono, Phase
Maximum Gain MC: 62dB single ended, 68dB balanced, MM: 35dB single ended, 40dB balanced
Output Impedance 150Ω
Input Impedance (Cartridge Load) Selectable MC: 100Ω, 250Ω, 470Ω, 1kΩ, 2.5kΩ, 4.7kΩ, 47kΩ, User Defined
Selectable MM: 10kΩ, 22kΩ, 47kΩ, User Defined
Frequency response +0-1 dB 1Hz – 100kHz
Maximum Output Voltage <1% THD 10 VRMS @ 1kHz (10kΩ load)
Channel Separation >70dB @ 1kHz (>65dB @ 20kHz)
Power Consumption 80 Watts
Dimensions W x D x H 17.5 x 17 x 4.75 inches (44.45 x 44.45 x 12.06 cm)
Weight 50lbs (22.72kg) Fully packed in one box


There are no reviews yet.

Be the first to review “VTL TP6.5 Series II”

Your email address will not be published.

Scroll to Top